VIII User Manual Pedelec Xion 155.2.1 Mounting and removalof the displayMounting:Place the display on the display holder at an angle ofapprox. 30 degrees.Using light pressure, turn the display through 30 degreesin a clockwise direction so that both components arealigned with one another. In the process, you can clearlyfeel the display lock into place.Removal:Turn the display approx. 30 degrees anticlockwise on thedisplay holder. In doing so, the electrical connections areundone and the display can be removed.Mounting the displayRemoving the displayPlease always turn the display off first before youremove it (➠ Chapter 5.1.1 “Switching on/off”).› In order to protect your Pedelec from undesir-able use by third parties or theft, the displayshould always be removed from the handlebarwhen the Pedelec is not in use.› You can protect the display from theft by meansof a self-tapping countersunk screw for plastic.Contact your specialist cycle shop about this.5.2.2 Display of the power-assist modeand energy recoveryYou can also find information on the assist modes in➠ Chapter 6.2 “Assist modes”.The selected assist level is displayed graphically on thefar left of the display. Above the diamond you will see theassist levels 1 to 5. The higher the selected assist level,the more assistance the drive provides with constantpedal force.Below the diamond, the energy recovery is displayed.You can set two different recuperation levels. The firstlevel yields 50% energy recovery, while the second yields100%. In the second level, the maximum possible energyrecovery is achieved.Assist levels
