VI User Manual Groove Pedelec 115 Control panel121 Button for power assist level2 On/Off switch3 Power-assist mode display4 Battery charge state indicator34The control panel on the handlebar has two or three but-tons (depending on the model) and two rows of LED indi-cators. The button used to control the level of assistanceis located on the left-hand side of the control panel.To the right at the bottom you can see the LED display barwhich indicates the level of assistance which has beenactivated and the current battery charge state.The POWER button is located above the LEDs.Press this button to switch the control panel on and off.On/Off buttonIf the model features pushing assistance, the switch forthis will be on the underside of the control panel.Button for pushing assistance5.1 On/Off buttonPress the POWER button to switch the control panel onand off.After it has been switched on, the system is always in themedium power-assist mode SPORT.5.2 Switches for power-assist levelYou can specify the power assist level via the Modebutton.Buttons for power assist levelEach time you press the Mode button the power assistchanges by one level.Each time you press the Mode button, the assistancechanges by one level from ECO through to the highest levelPOWER.If you require less assistance, press the Mode button untilthe level of assistance moves from the highest back to thelowest level.