Ransomes HR 9016 Turbo Dealer's Manual

Also see for HR 9016 Turbo: Parts and maintenance manual

Ransomes HR 9016 Turbo Dealer's Manual Manual pdf 12 page image

3 SET-UPGB-103.4 FRONT DECK _____________________________________________________________1. Place braces under left winglet and remove shippingband. Remove braces and lower winglet to normalposition. Repeat for right winglet.2. Assemble rear winglet supports (E and F) to centerdeck using 3/8-16 x 1” screws, lockwashers andlocknuts (G).3. Lift front deck to service position [Section 4.3].Assemble front winglet supports (H) to wingletsusing 3/8-16 x 1” screws, lockwashers and flatwashers (J). Lower front deck.4. Remove Caution tag from steering column andcenter lift control lever.Figure 3BFigure 3C3.5 FRONT LIFT LIMIT SWITCH__________________________________________________Note: For safety and shipping purposes, the front deckmotors have been disabled. The front deck motors willnot operate until the front lift limit switch is reconnected.1. Remove four 3/8-16 x 7/8” truss head screws (K) andlift floorboard (L) from tractor.2. Locate and connect front lift limit switch connector(M).3. Assemble floorboard (L) using screws (K).Figure 3DCAUTIONTo prevent personal injury or damage to theequipment, do not attemp to raise or lower front deckwith shipping bands installed. Place braces underdeck winglets before cutting shipping bands. Slowlyand carefully lower winglets to normal operatingposition. Do Not allow winglets to drop from shippingposition onto front deck.!EFGGHHJJMLK