Chapter 7: Device Management137 Port TypePort type DescriptionDCIM Dominion CIMNot Available No CIM connectedPCIM Paragon CIMPowerStrip Power CIMVM Virtual Media CIM (D2CIM-VUSB andD2CIM-DVUSB)Blade Chassis Blade chassis and the blades associatedwith that chassis (displayed in ahierarchical order)2. Click the Port Name for the port you want to edit. For KVM ports, the Port page is opened. From this page, you canname the ports and create power associations. For power strips, the Port page for power strips is opened. Fromthis page, you can name the power strips and their outlets. namethe power strips and their outlets.Configuring Standard Target ServersTo name the target servers:1. Connect all of the target servers if you have not already done so.See Step 1: Connect the Dominion KX II (on page 12) for adescription of connecting the equipment.2. Choose Device Settings > Port Configuration. The Port Configurationpage opens.3. Click the Port Name of the target server you want to rename. ThePort Page opens.4. Assign a name to identify the server connected to that port. Thename can be up to 32 characters, and alphanumeric and specialcharacters are allowed.5. Click OK.Configuring Powerstrip Targets (Non-PX)The Dominion KX II allows you to connect powerstrips to Dominion KX IIports and configure the powerstrips from the Port page. Note that this isdifferent then configuring PX powerstrip outlets. For information onconfiguring PX powerstrip outlets, see Powerstrip Outlet Control (onpage 168).
