168In This ChapterOverview................................................................................................168Turning Outlets On/Off and Cycling Power ...........................................169OverviewThe Dominion KX II allows you to control PX and Baytech powerstripoutlets connected to the Dominion KX II through a D2CIM-PWR.Note: For information on setting up a PX, see the Dominion PX UserGuide.Once a PX or Baytech is setup and then attached to the Dominion KX II,the powerstrip and its outlets can be controlled from the Powerstrip pagein the Dominion KX II interface. This page is accessed by clicking on thePower menu at the top of the page.From the Powerstrip page, you are able to turn the outlets on and off, aswell as cycle their power. You are also able to view the followingpowerstrip and outlet information:• Powerstrip Device Information: Name Model Temperature Current Amps Maximum Amps Voltage Power in Watts Power in Volts Ampere• Outlet Display Information: Name - Named assigned to the outlet when it was configured. State - On of Off status of the outlet. Control - Turn outlets on or off, or cycle their power. Association - The ports associated with the outlet.Chapter 8 Powerstrip Outlet Control
