Appendix D: FAQs295Power ControlDoes the Dominion KX II have a dual power option?All of the Dominion KX II models come equipped with dual AC inputs andpower supplies with automatic fail-over. Should one of the power inputsor power supplies fail, then the Dominion KX II will automatically switchto the other.Does the power supply used by the Dominion KX II automaticallydetect voltage settings?Yes. The Dominion KX II's power supply can be used in AC voltageranges from 100-240 volts, at 50-60 Hz.If a power supply or input fails, will I be notified?The Dominion KX II front panel LED will notify the user of a power failure.An entry will also be sent to the Audit Log and displayed on the DominionKX II Remote Client User Interface. If configured by the administrator,then SNMP or Syslog events will be generated.What type of power control capabilities does the Dominion KX IIoffer?Raritan's Remote Power Control power strips can be connected to theDominion KX II to provide power control of the KVM target servers. Aftera simple one-time configuration step, just right click the server name topower on, off, or recycle a hung server. Note that a hard reboot providesthe physical equivalent of unplugging the server from the AC power line,and reinserting the plug.Does the Dominion KX II support servers with multiple powersupplies? What if each power supply is connected to a differentpower strip?Yes. The Dominion KX II can be easily configured to support multiplepower supplies connected to multiple power strips. Up to eight (8) powerstrips can be connected to the Dominion KX II device. Four powersupplies can be connected per target server to multiple power strips.Does remote power control require any special serverconfiguration?Some servers ship with default BIOS settings such that the server doesnot automatically restart after losing and regaining power. For theseservers, see the server’s documentation to change this setting.What type of power strips does the Dominion KX II support?
