CHAPTER 2: I NSTALLATION 92. Line 2: User port status message: “A/N User (1, 2, 3 …) → None”User port status displays a scrolling status of all user ports, one user port per second. The User’s activechannel, 1 through 256, is displayed after the user port number.Raritan Computer Paragon II: Paragon832/1ReadyA User (1, 2, 3 … 8) → NoneA=Active User # 1-8- OR -Raritan Computer Paragon II: Paragon832/1ReadyN User (1, 2, 3, … 8) → NoneN=Non-Active User # 1-8Figure 7 LCD Normal DisplayPower Up Option:If you hold down the [FUNC] button on the front panel of the Paragon II unit during Power Up, theParagon II unit will clear its database and reset to factory defaults. Confirm functions by pressing the [ENT]button on the front panel.Clear DatabaseHit Ent/ESC?Figure 8 Power Up Clear DatabaseFunction Selection Screen:Several administrative functions can be performed on the Function Selection Screen on the Paragon IIunit’s front panel.Display Ver./SNTest User UST1Test Chan. UKVMTest Stack UnitStacking SupportSet LCD ContrastRe-ConfigureSet IP AddressReset UnitFigure 9 LCD FunctionsSelecting a Function:Press the [FUNC] button on the front panel of the Paragon II unit to enter Function Selection mode and usethe [Ç] and [È] buttons to scroll through the Function List. Press the [ENT] button on the front panel toselect displayed function and use the instructions below for each specified function. Press the [ESC] buttonon the front panel at any time to return to Normal Display.Function MenuDisplay Ver./SNFigure 10 Function Selection
