48 PARAGON II USER M ANUALAttach Z-CIM to Computer to be Added:For UKVMSPD Z-CIM:1. Connect the 6-pin mini-DIN keyboard and mouse and HD15 video connectors on the UKVMSPD Z-CIM to computer’s keyboard, mouse, and video ports.For UKVMSC Z-CIM with local port:1. Connect CCPnn cable’s 6-pin mini-DIN and HD15 connectors to computer’s keyboard, mouse, andvideo ports.2. Connect DB25 male end of CCPnn cable to DB25 female port on back of Z-CIM (UKVMSC).Attach new Z-CIM to the existing Z-CIM chain:1. Remove Z-CIM Terminator from the last Z-CIM’s UTP IN port and set aside.2. Connect a Category 5e UTP cable to UTP IN port on the Z-CIM that is currently last in the chain.3. Connect the other end of this Category 5e UTP cable to the UTP OUT port on the next Z-CIM/computer currently being added to the chain.4. Place the Z-CIM Terminator in the added Z-CIM’s UTP IN port.5. Power ON computer.6. Optional: Connect a local user console to the UKVMSC Z-CIM.Name Computer:1. At the Selection Menu, press [F5] to go to the Administration Menu.2. Select the Channel Configuration submenu.3. Select the Z4200U device channel.4. Press [G] to bring up a Channel Configuration menu for the Z-CIM chain.5. Use the [Ç] and [È] keys to highlight the Name field of the computer just connected via Z-CIM. Thechannel for this computer is displayed in green, and the highlight will turn yellow when it is selected.6. Press [Enter] - the highlight will turn blue.7. Type the desired computer name - the highlight will turn green as you begin to type.8. Press [Enter] - the highlight will turn yellow.9. Press [S] to save the new name.Verify and Save Changes:1. Press [F2] to return to the Selection Menu.2. The Selection Menu will display with the new computer name highlighted in white.3. Press [Enter] to switch to this selected computer.4. Normal computer access and operation indicates a successful connection.Important: At least half of all machines in the Z-CIM chain must be powered ON at any given timein order for the Z-CIM chain to function properly. There must be enough power to support all of theZ-CIMs in the chain.
