8 PARAGON II USER G UIDEStart-Up Display:When a Paragon II unit is powered ON, it performs a start-up test. It checks each channel anduser port to ensure proper operation.Normal Display:After start-up test, LCD panel displays two lines of messages:1. Line 1: Running message: “Raritan Computer Paragon II: Paragon832/1 Ready”For a Paragon II unit model P2-UMT832M, “Paragon832” is the default name of the MatrixSwitching Unit (this name may be changed through the System Configuration Menu).2. Line 2: User port status message: “A/N User (1, 2, 3 …) → None”User port status displays a scrolling status of all user ports, one user port per second. TheUser’s active channel, 1 through 128, is displayed after the user port number.Raritan Computer Paragon II: Paragon832/1ReadyA User (1, 2, 3 … 8) → NoneA=Active User # 1-8- OR -Raritan Computer Paragon II: Paragon832/1ReadyN User (1, 2, 3, … 8) → NoneN=Non-Active User # 1-8Figure 8 LCD Normal DisplayPower Up Option:If you hold down the FUNC button on the front panel of the Paragon II unit during Power Up, theParagon II unit will clear its database and reset to factory defaults. Confirm functions by pressingthe ENT button on the front panel.When “Clear Database Hit Ent/ESC?” appears on the LCD, press the ESC button if you want toexit the screen without clearing the database. To clear the database, press the ENT button; “ClearAll?” appears on the LCD. If you press the ESC button once more, the channel configurationwill be cleared and will be rebuilt later by the UMT. This is called a Partial Reset. However, ifyou press the ENT button, both the channel configuration and the user profile and system settingswill be cleared.Clear DatabaseHit Ent/ESC?Figure 9 Power Up Clear Database
