| 
22 IP-R EACH USER M ANUALEstablishing a New ConnectionTo connect to a Raritan networked device, simply double-click on its entry in the RRC Navigator. You willbe asked to authenticate the device.Note: The default IP-Reach login user name is , with the password . This user hasadministrative privileges. Passwords are case sensitive and must be entered in the exact case combinationin which they were created. The default password must be entered entirely in lowercase letters.To ensure security, change the default username password as soon as possible.If you do not see an entry for your IP-Reach in the RRC Navigator, follow the instructions in the CreatingNew Profiles section in this chapter to create a new connection profile for your IP-Reach.If you are having problems connecting to a Raritan device, be sure to check the following:• Username / Password: Raritan usernames and passwords are case-sensitive.• TCP Port: If you have configured your Raritan Device to use a non-default TCP Port, this informationmust be entered into its connection profile.• Firewall Settings: If you are accessing a Raritan Device through a firewall, that firewall must beconfigured to allow two-way communication on TCP Port 5000 (or the custom TCP Port to which yourRaritan Device has been configured).• Security Key: If you have configured your Raritan Device to require a group security key, that keymust be entered into the device's connection profile.Closing a Remote ConnectionWhen you would like to terminate your connection to an IP-Reach unit, simply right-click on the deviceentry in the RRC Navigator, and select Disconnect. |
