42 IP-R EACH USER M ANUAL• Enable IP Failover (TR Series only): This setting, which appears only for TR Series models, enablesthe secondary Ethernet port to be active for failover utilization.- When enabled, IP-Reach will verify the availability of its primary Ethernet port at a constantinterval indicated by the Ping Interval in seconds setting.- At each regular ping verification, should the primary Ethernet port be deemed unavailable foran interval longer than that designated by the Failover Timeout in seconds, IP-Reachautomatically disables its primary Ethernet Port and enables its secondary Ethernet Port.Path ConfigurationOn the Main Menu, select Configuration → Path Configuration to name each KVM Input port and toinstruct IP-Reach models of multiple ports to intelligently redirect new sessions based on yourconfiguration. For instance, if all KVM Input ports on a multi-port IP-Reach model are connected to thesame multi-user KVM switch, IP-Reach can automatically redirect incoming sessions to any of itsunoccupied KVM ports because ultimately they all connect to the same KVM switch.Consult the following diagrams to determine the appropriate Path Configuration value for your setup.One Path to All Ports:Used when ALL IP-Reach KVM Ports are connected to one KVM switch configuration. There is one mainpath to one KVM configuration and up to four users can connect to the KVM configuration. IP-Reach willautomatically assign the next open channel on the path to each user.One Path to All Ports
