Raven SCS 460 Installation And Service Manual

Also see for SCS 450: Installation manual Installation & service manual

9PARTSERIALNo.No.CONSOLE FEATURESIMPORTANT: This Console requires selection of US (Volume per acre), SI (Volume per hectare),or TU {1,000 sq. ft.} area; SP1 (wheel drive, etc.) or SP2 (radar) speed sensor; and C-SD (StandardValve), C-F (Fast Valve), C-FC (Fast Close Valve), C-P (PWM Valve) or C-PC (PWM Close Valve).Hold SELF TEST key to view selections.Console Revision can be determined by the letterstamped in REV box on label.Console Program can be determined by the letterstamped in PGM box on label.FUNCTION KEYS -- Used to Display DataTOTAL AREA -- Total Area AppliedTOTAL VOLUME -- Total Volume AppliedFIELD AREA -- Field Area AppliedFIELD VOLUME -- Volume Applied to FieldDISTANCE -- Distance TraveledSPEED -- Speed of VehicleVOLUME/MIN -- Volume Per MinuteDATA MENU -- Printer OptionCALIBRATION KEYS-- Used to enter data into theConsole to calibrate the system.BOOM CAL -- Length of Boom. Select Boomnumber by using theUP/DOWN arrow keys.SPEED CAL -- Determined by Speed SensorMETER CAL -- Meter Calibration NumberVALVE CAL -- Valve Response TimeRATE 1 CAL -- Target Application RateRATE 2 CAL -- Target Application RateTIME -- 24 Hour Clock (Military Time)Selects manual or fully automatic control.CE -Use like you do the CE key on acalculator.POWER-Selects POWER ON or OFF.Displays actual rate of application,calibration, and function data.Manual override control providescapability for spot application.ENTER -Used only to enter data into theConsole.