30CORRECTIVE ACTION1) Check fuse on back of Console.2) Check battery connections.3) Check operation of POWER ON/OFFswitch.4) Return Console to your Dealer to replaceProcessor Board Assembly.1) Return Console to your dealer to replaceFace Plate Sub-assembly.1) Return Console to your Dealer to replaceFace Plate Sub-assembly.1) Return Console to your Dealer to replaceFace Plate Sub-assembly and/or ProcessorBoard Assembly.1) Check battery voltage and battery connec-tions.1) Check battery voltage and battery connec-tions.1) Check battery voltage and battery connec-tions.1) Return Console to Dealer to replaceProcessor Board Assembly.1) Return Console to Dealer to replace LCDDisplay Board Assembly.1) Check Speed Sensor cable connector andplug on back of Console for loose pins.2) Clean pins and sockets on Speed Sensorcable connectors.3) If no extension cable is used, replaceSpeed Sensor Switch Assembly.4) If Speed Sensor Extension Cable is used,see Appendix 4.1) Run speed check on hard surface road. IfSPEED is accurate, investigate Speed Sen-sor on different wheel. (Cont. next page)PROBLEM1) NO DISPLAY LIGHTS WITH POWER ON.2) ALL KEYBOARD LIGHTS ON AT SAMETIME.3) A DIGIT CANNOT BE ENTERED VIAKEYBOARD.4) AN INDICATOR LIGHT ON A KEYWILL NOT ILLUMINATE.5) CONSOLE DISPLAYS FLASHING "CAL"WHENEVER VEHICLE ENGINE ISSTARTED.6) CONSOLE DISPLAYS FLASHING "CAL"WHENEVER MASTER SWITCH ISTURNED ON OR OFF.7) CONSOLE DISPLAYS FLASHING "CAL"WHENEVER SPEED IS CHANGED.8) "TIME" FUNCTION IS INACCURATEOR DRIFTING.9) ONE DISPLAY DIGIT HAS ONE ORMORE MISSING SEGMENTS.10) SPEED DISPLAY "0".11) SPEED INACCURATE OR UNSTABLE(WHEEL DRIVE SPEED SENSOR).TROUBLESHOOTING GUIDE