8CONSOLE FEATURESIMPORTANT: This Console requires selection of US (acres), SI [hectares], or TU{1,000 sq. ft.} area; SP1 (wheel drive, etc.) or SP2 (radar) speed sensor; andC-Sd (Standard Valve), C-F (Fast Valve), or C-FC (Fast Close Valve).Console Revision can be determined by theletter stamped in REV box on label.Console Program can be determined by theletter stamped in PGM box on label.CE -Use like you do the CE key on acalculator. This key is also usedto select the features listed inIMPORTANT box above.ENTER -Used only to enter data intothe Console.Displays function and calibrationdata.Displays actual rate of applicationand error messages.Manual override control provides capabilityfor spot applications.Selects manual or fully automatic control.POWER -Turns Console OFF or ON. TurningConsole OFF does not affect data stored.CALIBRATION KEYS -- Used to enter data into theConsole to calibrate the system.BOOM CAL -- Length of Boom. Select Boomnumber by using theUP/DOWN arrow keys.SPEED CAL -- Determined by Speed SensorMETER CAL -- Meter Calibration NumberVALVE CAL -- Valve Response TimeRATE 1 CAL -- Target Application RateRATE 2 CAL -- Target Application RateTIME -- 24 Hour Clock (Military Time)FUNCTION KEYS -- Used to Display DataTOTAL AREA -- Total Area AppliedTOTAL VOLUME -- Total Volume AppliedFIELD AREA -- Field Area AppliedFIELD VOLUME -- Volume Applied to FieldDISTANCE -- Distance TraveledSPEED -- Speed of VehicleVOL/MIN -- Volume Per MinuteDATA MENU -- Printer Option063-XXXX-XXX