Raymarine A Series Installation And Operation Instructions Manual

Also see for c125: Installation and operation instructions Operation instructions Operation instructions Installation and operation instructions Installation and operation instructions

Contents

Raymarine A Series Installation And Operation Instructions Manual Manual pdf 134 page image

9.5 Display preferencesYou can specify your preference for general display behavior.Menu item Description OptionsStarting page Allows you to select what page the display opensat start up.• Homescreen (default)• Last page — After power up the lastused page is displayed.• Choose page — After power up thepage selected is displayed.Key Beep An audible sound can be made each time a buttonis pressed or the touchscreen is used.• ON (default)• OFFCursor Autohide IfsettoOn, thecursorwillbeautomaticallyhiddenafter a period of no movement. If set to Off, thecursor will persist on the screen until moved.• ON• OFF (default)Range Controls On New e Series and gS Series displays you canspecify whether the Chart, Radar and Weatherapplication display the onscreen range in andrange out icons.Note:• Onscreen range controls are not availableon non-touchscreen displays.• Onscreen range controls cannot be hiddenon touch only displays.• Show (default)• HideContext Menu (Touchscreen displays only) Determines how thecontext menu is accessed using touch• Touch (default) — touching a chartobject opens the context menu.• Hold — Touch and holding on a chartobject opens the context menu.Pilot Control Bar Allows you to enable and disable the pilot bar oneach display individually, when connected to anSPX or SeaTalk autopilot.Note: For evolution autopilots the Pilot Baroption is in the Pilot Set-up page.• Shown• HiddenShared Brightness You can set up shared brightness groups (or“zones”) to adjust the brightness on multiple unitssimultaneously.Share Brightness• ON (default)• OFFBrightness Group• Helm 1 (default)• Helm 2• Cockpit• Flybridge• Mast• Group 1• Group 2• Group 3• Group 4• Group 5Screenshot File Enables you to specify the default memory cardslot for screen capture images.• MicroSD 1134 a Series / c Series / e Series