Raymarine A Series Installation And Operation Instructions Manual

Also see for c125: Installation and operation instructions Operation instructions Operation instructions Installation and operation instructions Installation and operation instructions

Contents

Raymarine A Series Installation And Operation Instructions Manual Manual pdf 39 page image

3.6 Typical systemsThe illustrations below show examples of possible system configurations, for more details on compatibleRaymarine devices please refer to the System integration section.Note: In the examples below the multifunction display(s) could be any variant of Raymarine’s 3rdgeneration multifunction displays e.g. a Series, c Series, e Series or gS Series.Example: Basic systemSeaTalkngSeaTalkhs / RayNetSeaTalkhs / RayNet 6D12245-31 2 3 4 51. Multifunction display2. Network switch3. Radar scanner4. Actuator Control Unit (ACU)5. Evolution autopilot6. SeaTalkng pilot controller (optional)Note: A network switch is only required if multiple devices are connected using SeaTalkhs / RayNet.Example: Basic system with sonar variant displaySeaTalkngSeaTalkhs / RayNetD12589-21 2 3 4 51. Multifunction display2. Sonar transducer3. Radar scanner4. Evolution autopilot5. SeaTalkng pilot controller (optional)Planning the installation 39