• From a selected waypoint or any leg withina route.You can also follow any route in reverse order.Following a stored routeFrom the chart application:1. Select Menu.2. Select Navigate.3. Select Follow Route.The Route list is displayed.4. Select the route you want to follow.5. Select Follow Route, or6. Select Follow Route in Reverse to follow theroute in reverse order.Cancelling navigation of a routeFrom the chart application:1. Select the Route.The route context menu is displayed.2. Select Stop Follow.Advancing to the next waypoint in a routeYou can skip the current active waypoint andadvance to the next waypoint in a route at any time.While following a route in the chart application:1. Select the route.The route context menu is displayed.2. Select Advance Waypoint.Note: If the current destination is the last waypoint,the chart advances on to the first waypoint in theroute.18.4 Chart ranging and panningRanging in and outThe table below shows the Range controls availablefor each display variant.Rotary Control • c Series• e Series• RMK-9 keypadRange in andRangeoutbuttons• c Series• e Series(excluding e7and e7D• RMK-9 keypadRange in andRange outon-screen icons• a Series• e Series• gS SeriesNote: e Seriesand gS Serieson-screenrangecontrols canbe enabledand disabledfrom theHomescreen:Customize> DisplayPreferences> RangeControls Multi-Touchgesture — Pinchto Zoom• a Series• gS SeriesPanning the chartYou can pan the chart area on a touchscreenmultifunction display by following the steps below.In the chart application:1. Swipe your finger across the screen from rightto left to pan right.2. Swipe your finger across the screen from left toright to pan left.3. Swipe your finger across the screen from top tobottom to pan up.4. Swipe your finger across the screen from bottomto top to pan down.Panning the chartYou can pan the chart area on a non-touchscreenmultifunction display by following the steps below.From the chart application:1. Move the Joystick in the direction you want topan.Chart application 237
