Raymarine ST70+ Operating Manual

Also see for ST70 Instrument: Installation guide Operating guide User reference guide User reference handbook Installation guide

Raymarine ST70+ Operating Manual Manual pdf 11 page image

5Use these instructions to set the screen colors for optimum viewing (daytime and nighttime).There are four different color settings plus an inverse video option.Choosing colors1. StartingWith any operational page displayed, press MENU, to display the Main Menu, then scroll tothe Display Settings option.Press OK to show the Display Settings menu.2. Select optionAt the Display Settings page, scroll to the Colors option.Press OK to display the 1. Colors - select zone screen.3. Select displaysScroll to select the displays on which you want to set thescreen colors:• This group - affects all displays in the same group asthe selected display (default setting).• All displays - affects all displays in the system.• This display - affects just this display.Press OK to display the 2. Colors - select value screen.4. Select colorScroll to select the screen colors you want. You canchoose from.• Mode 1• Mode 2• Mode 3• Red/black (recommended for night time viewing)• InversePress OK to save the setting and return to the DisplaySettings menu.Returning to operating pageTo return to normal operation from the Display Settings menu, press CANCEL twice.Applicability: The procedures on this card apply to all configurations of ST70+ Instruments and Pilot Controllers.iD11023-1Press OK to continue1. Colors - select zoneSelect the zone for colorchanges, using < & >.This groupiiD11024-1Press OK to accept1. Colors - select valueSelect colors using < & >.Mode 1ST70+ general informationSetting the screen colors