Raymarine ST70+ Operating Manual

Also see for ST70 Instrument: Installation guide Operating guide User reference guide User reference handbook Installation guide

Raymarine ST70+ Operating Manual Manual pdf 35 page image

Card 17continued ...IntroductionThis card tells you how to set and use the ST70+ alarm clock.Initial setup1. Select Display SettingsPress MENU to display the Main Menu then scroll to Dis-play Settings.Press OK to display the Display Settings menu.2. Select TimersAt the Display Settings menu, scroll to the Timers option,then press OK. to display the Timers menu.Setting alarm clock1. Select Alarm Clock functionWith the Timers menu displayed, scroll to Alarm Clockthen press OK to display the Alarm Clock setup page.2. Set alarm clock statusPress PAGE UP to select the upper adjust box.Use the Rotary Control to set the alarm clock either On orOff, as required.Press PAGE DN to select the lower adjust box.3. Adjust alarm timeWith the lower adjust box selected:1. Use the rotary to select the hours box.2. Press OK.3. Use the Rotary Control to set the hour value for the alarmtime.4. Press OK5. Use the Rotary Control to select the minutes box.6. Press OK.7. Use the Rotary Control to set the minute value for thealarm time.8. Press OK.Applicability: The procedures on this card apply to all configurations of ST70+ Instruments.They are NOT relevant to ST70+ Pilot Controllers.iD11110-1Display SettingsTimersAlarm clock and race timers.Press OK to select100D11111-1TimersAlarm ClockPress OK to selectiD11112-1Press OK to acceptAlarm ClockOnPress CANCEL to exit withoutsaving.:Hrs2507iD11627-1Press OK to acceptAlarm ClockOnPress CANCEL to exit withoutsaving.:Hrs2507ST70+ InstrumentUsing alarm clock