Card continued1General operationFor information on display/keypad grouping, refer to Card 2.Selecting & confirming options & valuesMany ST70+ setup functions, display options and values are set up by using the keyboard toscroll to the required option or value, then confirming, by pressing OK.The manner in which you do this depends on keypad type.Scrolling.To scroll to an option or set a value, either:• Press the < and > buttons on the sail boat Pilot Controllerkeypad, or• Turn the Rotary Control on the power boat Pilot Controllerkeypad or the Instrument keypad.OK functionTo OK selections and edited values, either:• Press the OK button, on the sail boat Pilot Controller keypad, or• Press the center of the Rotary Control inwards, on the power boatPilot Controller keypad or the Instrument keypad.ST70+ InstrumentsOn an ST70+ Instrument display:• Data is displayed on operational pages. Up to eight pages are available.• Each page can be divided into up to six separate data areas or ‘frames’.To move from page to page, use PAGE UP or PAGE DN on the associated keypad. You canalso apply a rollover (see Card 14) to change pages automaticallyCustomizing pagesYou can change any operational page, to show only the information you want. You can:• Change the information in any frame of any page. Refer to Card 15.• Rebuild any page, so it has a different frame layout with different data. Refer to Card 16.ST70+ Pilot ControllersOn an ST70+ Pilot Controller display, you canchoose one of three different page types to viewnavigational information.To move from one Pilot Controller page type toanother, hold down MENU for 1 second.Refer to Card 7 for a description of the data on the different Pilot Controller page types.orScrolling=OK functionsDepthft9.0LatNSpeedkts7.0Headingxx63Time24H11:23o47o Lon47Page 1D11018-1Page 2Page 3Page 4Page 5Page 6 Page 7 Page 8GILKICKER POINTGILKICKER POINTStandbyPlain view Compass Rose view Isometric viewST70+ general informationGetting started