18.1 Camera application overview andfeaturesAnalog and IP camera and video feeds can beviewed using the Camera application. Analog feedsmust be connected directly to the display, IP feedsmust be available on the SeaTalkhs network. IPcamera feeds can be recorded and photos can betaken.D12881-17 861 2 3 4 51 Camera feed number – indicates the current feedand number of available feeds2 Recording status – indicates that the cameraapplication is recording and the current elapsedrecord time3 Camera name – indicates the name of the camerathat is currently displayed4 Recording – indicates if the camera application isrecording and which feed is being recorded5 Menu – opens the Camera application’s main menu6 Cycle – indicates if the feed cycling is turned Onor Off7 Record video – temporary onscreen icon to start /stop recording (Touchscreen displays only)8 Take photo – temporary onscreen icon to take aphoto (Touchscreen displays only)Important:• Multifunction displays must be powered upbefore power is applied to networked IPcameras; this is to enable your multifunctiondisplay to assign the camera(s) a valid IPaddress.• If IP a camera(s) is not detected, try powercycling the camera(s) whilst leaving themultifunction display turned on.Camera application featuresChanging camera or videofeeds.• 18.2 Changing the camerafeedCycling through availablefeeds.• 18.5 Camera cyclingDisplaying multiple feedsusing Quad View.• 18.4 Displaying multiplecamera feeds using QuadViewRecording IP camera feeds • 18.10 Record andplaybackPlaying back recordedfootage.• 18.10 Record andplaybackTaking photos of an IPcamera feed• Taking a photoViewing images. • 18.12 Viewing photosNote: For information on connecting a camera/ video source and compatible video formats,refer to the Cable sand connections section of theinstallation instructions for your product.274 LightHouse MFD operation instructions
