21.1 MFD Wi-FiMFDs that include built in Wi-Fi can connect to Wi-Fiaccess points / mobile hotspots and can also act asa Wi-Fi Access point for other devices.Wireless RouterPWR SYS WLAN 1 2 3 4 WAN WPSD13385-1Personal computers / Smart devices can beconnected to the MFD to enable:• use of compatible Mobile applications on yoursmart device,• the smart device to log the MFD in to networksthat require user authentication,• access to the built-in web interface (from yoursmart device) of compatible products such as theAX8 Thermal camera.The MFD can be connected to a Wi-Fi Accesspoint / mobile hotspot to enable available MFDinternet services such as checking online for productsoftware updates.The MFD can be connected to a Wi-Fi Access point/ mobile hotspot at the same time as acting as anAccess point for other devices. If the MFD hasan internet connection then this connection can beshared with other devices connected using Wi-Fi andwith MFDs on the same SeaTalkhs network.Only 1 MFD on the same SeaTalkhs network can beconnected to an access point at a time, all networkedMFDs will share this connection.When the MFD’s Wi-Fi is enabled it will automaticallyconnect to previously accessed Access points /mobile hotspots within range.Enabling Wi-FiFrom the Wi-Fi menu: (Homescreen > Set-up >Wireless Connections > Wi-Fi)1. Select Wi-Fi so that On is selected.Warning: Network data chargesWhen connecting and downloading datafrom a mobile hotspot data roamingcharges may apply. Check with yournetwork service provider for details ofyour data allowance.21.2 Connecting to a Wi-Fi accesspoint / mobile hotspotRaymarine Wi-Fi enabled MFDs can be connectedto the internet via a Wi-Fi access point or mobilehotspot.From the Wi-Fi menu: (Homescreen > Set-up >Wireless Connections > Wi-Fi)1. Select Wi-Fi NetworksThe MFD will now search for and display a list ofall Wi-Fi networks in range. The list will be sortedby decreasing signal strength.2. Select the network that you want to connect to.The Network details are displayed.3. Select Connect.The MFD will now attempt to connect to the selectednetwork.When connecting to a secured network (identifiedby the lock symbol) the onscreen keyboard willbe displayed to enable you to enter the network’spassphrase.Once connected the network credentials will besaved by the system and be available to networkedMFDs.312 LightHouse MFD operation instructions
