Raymarine gs series Installation Instructions Manual

Also see for gS125 inverted: Operation instructions Operation instructions Installation and operation instructions

Contents

Raymarine gs series Installation Instructions Manual Manual pdf 131 page image

Appendix A Connectors and pinoutsPower, data, and video connectorD12186-11 84 92 73 651110Item RemarksIdentification PWR / NMEA / VideoConnector type 11 pin twist-lockCurrent source to network No current sourced forexternal devicesCurrent sink from network • PSU: Main Power input.• NMEA: No power requiredfor interface.• Video: No power requiredfor interface.Power, data and video cable cores and colorsSignal Pin AWG ColorBATT+ 2 16 RedBATT- 7 16 BlackSCREEN 10 26 BlackNMEA1 TX+ 8 26 YellowNMEA1 TX- 9 26 BrownNMEA1 RX+ 1 26 WhiteNMEA1 RX- 4 26 GreenNMEA2 RX+ 3 26 Orange /WhiteNMEA2 RX- 11 26 Orange /GreenVIDEO IN 6 RG179coaxialVIDEO RTN 5 ScreenVideo in / Alarm out connector14 52 3Pin 1 Alarm +Pin 2 Alarm –Pin 3 PurplePin 4 Video ScreenPin 5 Video CorePoE Network connectorD12187-11589 106742 3Pin Cable Signal PoE1 White / Orange BI_DA+ DC+2 Orange BI_DA- DC+3 Blue BI_DC+ DC+4 White / Blue BI_DC- DC+5 White / Green BI_BD+ DC-6 Green BI_BD- DC-7 White / Brown BI_DD+ DC-8 Brown BI_DD- DC-9 Not connected Not connected Not connected10 Foil Shield Isolated from 0VNote: Use only Raymarine RayNet cables whenconnecting SeaTalkhs devices.SeaTalkng connector123456Item RemarksIdentification ST2/NMEA2000Connector type STNGCurrent source to network No current sourced forexternal devicesCurrent sink from network <160mA (Interface drive only)Pin Signal1 +12V2 0V3 Screen4 CanH5 CanL6 SeaTalk (not connected)Note: Use only Raymarine cables whenconnecting to SeaTalkngConnectors and pinouts 131