6.12 Pairing the keypadThe keypad can control 1 or more multifunctiondisplays. Multiple keypads can be connected to asystem. Each keypad can be paired with up to 4multifunction displays.With the keypad connected to the multifunctiondisplay:1. Select External Keypad from the ExternalDevices menu: homescreen > Set-up > SystemSettings > External Devices > ExternalKeypad.2. Select Pair Keypad.3. Press any button on the external keypad.4. From the pop-up message select the orientationof the keypad.Either landscape or portrait orientations areavailable.The keypad is now paired.Unpairing the keypadThe keypad can be unpaired from an individualdisplay.1. Select External Keypad from the ExternalDevices menu: homescreen > Set-up > SystemSettings > External Devices > ExternalKeypad.2. Select Clear Pairings.3. Select Yes to unpair the keypad with the display.6.13 Enabling autopilot controlEnabling the autopilot control function —SeaTalk and SPX SeaTalkng autopilotsTo enable control of your SeaTalk or SPX SeaTalkngautopilot using your multifunction display follow thesteps below.From the Homescreen:1. Select Set-up.2. Select System Settings.3. Select Autopilot Control so that On ishighlighted.Selecting Autopilot Control will switch the controlbetween On and Off.On a system containing multiple displays the pilotcontrol is enabled on all displays at the same time.Enabling the autopilot control function —Evolution autopilotsTo enable control of your Evolution autopilot usingyour multifunction display follow the steps below.From the Homescreen.1. Select Set-up.2. Select System Settings.3. Select External Devices.4. Select Pilot Set-up.5. Select Pilot control so that On is highlighted.Selecting Pilot control will switch the Autopilotcontrol function on and off.Getting started 79
