Red Epic REDCAST Operation Manual
                                   | |
Contents
| 
R E D C A S T M O D u l E O P E R AT I O N G u I D ECOPYRIGHT © 2015 RED.COM, INC 955-0072, REV-H | 17SET UP GENLOCK WITH THE REDCAST MODULEThe REDCAST Module has a BNC SYNC port that supports incoming sync signals. This section describeshow to set up the camera to receive sync signals from an external genlock device via the REDCAST Module.NOTE: When a REDCAST Module is installed, you can still receive sync signals via the SYNC port on theBRAIN. For more information, see the DSMC Operation Guide, available at www.red.com/downloads.1. Set up the REDCAST Module. For more information, go to “Output Quad UHD or 1080p” on page 12.2. Connect the REDCAST Module to a genlock device:A. Ensure that the genlock device is off.B. Use a 75 Ω coaxial cable to connect the SYNC port on the REDCAST Module to a compatible genlockdevice.C. Turn on the genlock device.3. Go to Menu > Settings > Display > REDCAST.4. Select On from the Genlock drop-down menu. |
Related manuals for Red Epic REDCAST
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine