Red Epic REDCAST Operation Manual
                                   | |
Contents
| 
COPYRIGHT © 2015 RED.COM, INCR E D C A S T M O D u l E O P E R AT I O N G u I D E955-0072, REV-H | 29SPECIFICATION DESCRIPTIONWeight 1.606 lb (728.5 g)Dimensions Height: 4.29" (109 mm)Width: 5.43" (138 mm)Depth: 2.24" (56.8 mm)Additional Mounting 5x 1/4-20 mounting points on topConstruction Machined, Tooled (Early models are machined)Material AluminumCoating Black powder coatOperating Temperature 0°C to 40°C (32°F to 104°F)Storage Temperature –20°C to 50°C (–4°F to 122°F)Operating Humidity Range 0% to 85%, non-condensingStorage Humidity Range 0% to 85%, non-condensingBroadcast Output Formats 3840 × 2160p (4K UHD), up to 59.94 FPS4x 1080p (HD), up to 59.94 FPSBroadcast Output Frame Rates 23.98p, 24p, 25p, 29.97p, 50p, 59.94pRecording Format (Video) Currently selected resolution settings, up to 6K up to 59.94 FPSAudio Out N/A. Module does not currently support audio through SDISMPTE Timecode Timecode (TC)3G/HD-SDI Output 4x BNC (rated for 3G-SDI) 14x uncompressed 1920 × 1080p Level-A YCbCr 4:2:2 10-bit video (Rec 709) 23G-SDI (3G): Meets SMPTE ST 424 and 425 when frame rates > 30 Hz 3HD-SDI (1.5G): Meets SMPTE ST 292 when frame rates < 30 Hz 3HD (1080p): SMPTE ST 274 2Genlock In 1x BNC, 75 ΩTimecode In 1x BNC, 75 Ω, SMPTE ST 12-2Power Consumption Approximately 15 WDSMC ® Compatibility RED DRAGON ® sensor based ONLY (NOT MYSTERIUM-X ® )Firmware Requirement 5.2.28 or later1. In UHD mode, each SDI-OUT connector sends one (1) quadrant of the UHD video.2. Applicable to each SDI-OUT connector.3. Applicable to the full 4K UHD video.A TECHNICALSPECIFICATIONS |
Related manuals for Red Epic REDCAST
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine