Red Epic REDCAST Operation Manual
                                   | |
Contents
| 
COPYRIGHT © 2015 RED.COM, INCR E D C A S T M O D u l E O P E R AT I O N G u I D E955-0072, REV-H | 32This section describes the basic setup and workflow for using the REDCAST™ Module in different environments.For more information about different setup and integration options, go to www.red.com/products/4k-broadcast.ESSENTIAL (BASIC) BROADCAST SETUPThis section describes an example setup and workflow for connecting the REDCAST Module directly to amonitor.ESSENTIAL (BASIC) SETUP: RECOMMENDED EQUIPMENT REDCAST Module (required) +1 Adaptor Module or Module Adaptor (required) Four (4) 3G/HD-SDI cables (required) 4K recorder Monitor (required for playback) RED ® Touch 7.0" LCD DSMC Tactical Top Plate 2.0ESSENTIAL (BASIC) INSTALLATIONThe example installation below describes how to record to an external 4K recorder while viewing the live imageon a monitor. If your setup does not require using either an external 4K recorder or a monitor, skip the stepsrelated to the device.1. Set up the camera:A. Set up the camera rig.B. Install the REDCAST Module on the BRAIN ® . For more information, go to “Install the REDCAST Module”on page 10.2. Connect all four (4) SDI-OUT ports on the REDCAST Module to four (4) 3G/HD-SDI IN ports on a 4K recorderusing four (4) 3G/HD-SDI cables.3. Connect the 4K recorder to a monitor.NOTE: This setup may require a signal converter. Check the input/output connectors on your devices todetermine what cables and convertors are necessary.C REDCAST MoDuLEWoRKFLoW |
Related manuals for Red Epic REDCAST
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine