Red Epic REDCAST Operation Manual
                                   | |
Contents
| 
COPYRIGHT © 2015 RED.COM, INCR E D C A S T M O D u l E O P E R AT I O N G u I D E955-0072, REV-H | 22You can output a 3D lookup table (LUT) via each SDI-OUT connector on the REDCAST™ Module.NOTE: Using a 3D LUT requires that your DSMC ® is on firmware v6.0 or later.COMPATIBLE 3D LUT FORMATSThe REDCAST Module is compatible with the following 3D LUTs: DaVinci Resolve ® 3D Cube LUT (.cube) IRIDAS/Adobe ® 3D Cube LUT (.cube) Nucoda CMS 3D LUT (.cms)The REDCAST Module is compatible with the following 3D LUT formats: 17x17x17 26x26x26 32x32x32 33x33x33MANAGE 3D LUTSTo manage 3D LUTs, go to Menu > Settings > Display > Monitor Control.3D LUTs can be stored on the camera or transferred to SSD, so that you can build a library of 3D LUTs, orquickly copy 3D LUTs from one camera to another via SSD. In Camera: 3D LUTs that are saved internally on the camera. On Media \luts: 3D LUTs that are on the SSD.04 LOAD ANDUSE 3D LUTS |
Related manuals for Red Epic REDCAST
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine