111Parameter FunctionAlarm output The alarm output channel may vary. The interface here is for reference only.Please click the corresponding number and then click the trigger button.Trigger Enable/disable alarm output.Please note once you activate an alarm manually, you need to click the output channelnumber again and then click trigger button to disable it. Otherwise the alarm can’t becancelled.Refresh Search alarm output status.6.4.3.4 RecordRecord control interface is shown as in Figure 6-49.The bit stream type includes main stream and extra stream.Figure 6-49 RecordPlease refer to the following sheet for detailed information.Parameter FunctionSchedule System enables auto record function as you set in schedule setup (chapter 7.3.2.2).Manual Enable corresponding channel to record no matter what period applied in the recordsetup.Stop Stop current channel record no matter what period applied in the record setup.6.4.3.5 AccountHere you can add, remove user or modify password. See Figure 6-50.
