RedLeaf 32 Series User Manual
                                                                                                                                              | |
Contents
| 
13512 Appendix E No-IP DDNSPlease double click DDNS to go to the configuration interface. You can see an interface is shown as in Figure 12-1.Figure 12-1 DDNS Type: You can select from the dropdown list. There are five options: No-IP, DynDNS, CN99, Private and Oray. Server IP: You can use ping command to get server’s IP Port: input server port here. Domain Name: Get the domain name you get from your DDNS service provider. User: Get the user name you get from your DDNS service provider. Password: Enter corresponding password.Highlight the icon in front of Enable to enable the DDNS server configuration.It’s a system of dynamic DNS service. If you do not have a Static IP address on the Internet, you need to have a dynamic IP. It is tosay your IP address changes after a certain period of time.You can follow the steps listed below to display image on your device even your IP is dynamic.You need to use a DDNS service and create a domain name that is not necessarily direct use the IP address.After completed configuration in the device DDNS service can constantly inform the latest device’s connection IP, and modify its IPon the table of data from the server. Then we have a constant domain name in the Web browser, along with the HTTP port, send arequest to identify the car IP of the domain name typed. The server will direct the domain name to the IP connection, thus allowingaccess to the device which does not have a fixed IP in the network. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine