RedLeaf 32 Series User Manual
                                                                                                                                              | |
Contents
| 
45Please note: After successful connection, you can see WIFI connection icon at the top right corner of the preview interface. When the hotspot verification type is WEP, system displays as AUTO since the device can’t detect its encryption type. System does not support verification type WPA and WPA2. The display may become abnormal for the verification type andencryption type.After device successfully connected to the WIFI, you can view the hotspot name, IP address, subnet mask, default gateway andetc. See Figure 4-44.Figure 4-444.6.5.9 EmailThe email interface is shown as below. See Figure 4-45. SMTP server: Please input your email SMTP server IP here. Port: Please input corresponding port value here. User name: Please input the user name to login the sender email box. Password: Please input the corresponding password here. Sender: Please input sender email box here. Title: Please input email subject here. System support English character and Arabic number. Max 32-digit. Receiver: Please input receiver email address here. System max supports 3 email boxes. SSL enable: System supports SSL encryption box. Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval. Health email enable: Please check the box here to enable this function. This function allows the system to send out the testemail to check the connection is OK or not. Interval: Please check the above box to enable this function and then set the corresponding interval. System can send outthe email regularly as you set here. Click the Test button, you can see the corresponding dialogue box to see the emailconnection is OK or not. See Figure 4-46.Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion detection or theabnormity event activates the email, system sends out the email according to the interval you specified here. This function is veryuseful when there are too many emails activated by the abnormity events, which may result in heavy load for the email server. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine