RedLeaf 32 Series User Manual
                                                                                                                                              | |
Contents
| 
85Please refer to the following sheet for PTZ setup information.Parameter FunctionScan Move the camera to you desired location and then click left limit button. Then move the camera again and then click right limit button to set a right limit.Preset Use direction keys to move the camera to your desired location and then input presetvalue. Click add button, you have set one preset.Tour Input auto tour value and preset value. Click add button, you have added one presetin the tour. Repeat the above procedures you can add more presets in one tour. Or you can click delete button to remove one preset from the tour.Pattern You can input pattern value and then click start record button to begin PTZ movement.Please go back to Figure 7-10 to implement camera operation. Then you can click stoprecord button in Figure 7-11. Now you have set one pattern.Assistant The assistant items include: BLC, Digital zoom, night vision, camera brightness, flip.You can select one option and then click start or stop button.Matrix Please select matrix x and then input corresponding monitor output channel number, videoinput channel number. Then you can click video switch button.Light/wiper You can control the light and wiper of the peripheral device. Please note the peripheraldevice shall support this function.6.2.5 Color and More SetupColor and other setup interface are shown as in Figure 6-12.Figure 6-12 ColorPlease refer to the following sheet for detailed information.Parameter FunctionVideosetupIt is to adjust monitor video brightness. Note:All the operation here applies toWEB end only.It is to adjust monitor video contrast ness.It is to adjust monitor video saturation.It is to adjust monitor video hue. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine