US-12CHT220/CHT220L7. Starting and stoppingWarm engineHold the body of the machine on the ground using your lefthand (CAUTION! Not with your foot!). Grip the starterhandle, slowly pull out the cord with your right hand untilyou feel some resistance (the starter pawls grip), nowquickly and powerfully pull the cord. Never wrap thestarter cord around your hand.StoppingThe engine is switched off by moving the stop switch to thestop position.CAUTION!The stop switch automatically returns to the start position.Inorder to prevent unintentional starting, the spark plug capmust be removed from the spark plug when assembling,checking and/or performing maintenance.■ GENERAL WORKING INSTRUCTIONSIMPORTANT!This section takes up the basic safety precautions forworking with a hedge trimmer.If you encounter a situation where you are uncertain howto proceed you should ask an expert. Contact yourdealer or your service workshop.Avoid all usage which you consider to be beyond yourcapability.WARNING! The machine can cause seriouspersonal injury. Read the safety instructionscarefully. Learn how to use the machine.WARNING! Cutting tool. Do not touch thetool without first switching off the engine.Safety instructions regarding the surroundings• Never allow children to use the machine.• Observe your surroundings and make sure that there isno risk of people or animals coming into contact with thecutting equipment.• Ensure that no-one comes closer than 15 m while youare working.• Never allow anyone else to use the machine without firstensuring that they have understood the contents of theoperator's manual.• Never work from a ladder, stool or any other raisedposition that is not fully secured.• Keep in mind that the operator is responsible foraccidents or hazards occuring to other people or theirproperty.Safety instructions while working• Always ensure you have a safe and stable workingposition.• Never leave the machine unsupervised with the motorrunning.• Always use both hands to hold the machine. Hold themachine in front of your body.8. Working techniques