371.30 Myzone - Wiring connection to AC unitsUnit Make ConnectionMHI Take the Remote Controller wire from the fancoil unit and connect it to the AC Unit ControlCable on the CM225 / CM325MHIPanasonic Take the A / B control wire from the fan coilunit and connect it to the AC Unit ControlCable on the CM225 / CM325PRinnai See detailed instructions on 1.30.8 page 45Samsung* Take the F3 / F4 control wire from the fan coilunit and connect it to the AC Unit ControlCable on the CM225 / CM325S. Thisconnection requires the correct polarity. Seedetailed instructions on 1.30.9 page 46Temperzone See detailed instructions on 1.30.10 page 47Toshiba Take the A / B control wire from the fan coilunit and connect it to the AC Unit ControlCable on the CM225 / CM325TYork* See detailed instructions on 1.30.11 page 48Universal ControlModuleThe universal control module covers units withstandard 24V control. See detailed instructionson 2.31 to 2.31.9 pages 49-58Unit Make ConnectionActron* See detailed instructions on 1.30.1 page 38Daikin Take the P1 / P2 control wire from the fan coilunit and connect it to the Myzone CM225 /CM325DFujitsu* Do not connect the 12V wire to the Myzone(Usually Red). Connect the black and whitewires from the fan coil unit to Myzone CM225 /CM325FHaier See detailed instructions on 1.30.2 page 40Hitachi Take the A / B control wire from the fan coilunit and connect it to the Myzone CM225 /CM325HSee detailed instructions on 1.30.3 page 46Kaden See detailed instructions on 1.30.4 page 41Kelvinator See detailed instructions on 1.30.5 page 42LG See detailed instructions on 1.30.6 page 43Midea See detailed instructions on 1.30.7 page 44Mitsubishi Electric Take the Remote Controller (A / B) controlwire from the fan coil unit and connect it to theAC Unit Control Cable on the CM225 / * Certain models only. Check with Reece for compatibility prior to ordering
