391.30.2 Myzone - Wiring connection to Haier unitsUnit Make ConnectionHaier 1. Connect a shielded, 2 core, twisted pair control cable from the CM225 / CM325HI to theA / B terminals on the Haier Interface board YCJ-A002. Connect the interconnectingcable supplied by Haier to CN24 in the fan coil unit of the Haier Interface board YCJ-A002.Set the dipswitches as shown below. Polarity is critical.Fig (N) - Myzone CM225 / CM325HIFig (L) Haier Interface boardModel: YCJ-A002 (Fisher & Paykel partno. 51102 ) Shielded, 2 core, twisted pair control cable(not supplied)BACorrect polarityCN24Fig (M) Haier FCU boardInterconnecting cablesupplied by Haier.Requires the plug tobe cut off to connectto the Haier interfaceDipswitch all=OFF 1 = OFFAB
