24 | City Series CV72EPVinstallationTop rear standoffsUnit Assembly Prior to InstallationBefore you startRemoving the unit from the palletSide standoff assembly CV72EPVThe CV72EPV has 4 standoffs, 2 on each side that need assembly beforeinstalling.The standoffs are shipped in a flat position -- fold the standoff and install thestandoff onto the unit by sliding the 2 tabs into the slots on the unit. Bend thetabs to secure. Secure opposite end of the standoff with one screw.Rear Standoffs CV72EPVThe 8 rear standoffs are already attached to the appliance. Do not removethese standoffs. The 2 top rear standoffs are designed so that screws can beused to secure the appliance to the rear wall if needed. Studs must be in thislocation if choosing to screw this into studs.Leveling legsLeveling LegsThere are four levelling legs - two on each side that can be adjusted (with thesupplied tool--found in the manual package) if required.tooltipRemove the screws securing the unit to the palletDue to the size and weight (529 pounds shipping weight) of the CV72EPV--lifting and moving the unit will require 4 people.Place a length (long enough to get a solid grip on each side) of 2 x 4 underthe handle on each side.Lift and move the unit carefully.Note: When in position, the handles may be removed from the unit by removing6 screws on each handle. Ensure that when the handles are removed that thescrews are put back into place in all 12 holes locations where the handle hadbeen previously (6 per side). The handles can be recycled.standoffstooltip
