![Regency City CB72EPV-LP Owners & Installation Manual Manual pdf 49 page image](https://manuals-archive2.s3.amazonaws.com/4209491/1b7b7d51bf592ade8b4a72eb4d90f03e49f.jpg)
City Series CB72EPV | 49installationFraming and Finishing Inset Installations CB72EPV1. Frame in the enclosure for the unit with framing materialNote: When constructing the framed opening ensure there is access to installthe gas lines,electrical. Also the wiring harness must be wall mounted usingthe receptacle provided with the appliance. The wiring harness will be locatedon the right hand side of the appliance if facing the unit from the front. Thismust be done prior to any finishing.2. For exterior walls, insulate the enclosure to the same degree as the rest ofthe house, apply vapour barrier and drywall, as per local installation codes.(Do not insulate the fireplace itself.)WARNING: Failure to insulate and add vapor barriers to the inside of theexterior wall will result in operational and performance problems including, butnot limited to: excessive condensation on glass doors, poor flame package,carbon, blue flames etc. These are not product related issues.3. To ensure the chase is sealed from the outside wall into the room, all jointson the facing wall MUST be sealed, mudded, and taped to finish.Note that in all applications while there is a zero clearance to combustiblesto the unit, all clearances to combustibles from the venting inside the chasestill applies. Please see venting clearances in the specific product manual.4. Combustible material (drywall,wood,wood panels, etc.) may be brought upto the appliance (top,bottom and sides)5. Ensure that the material being used does not encroach anywhere in thearea of the glass. This would cause dangerous operating conditions.6. This appliance comes with a 1/2" lip at top and bottom to hide the ends ofthe drywall. The 1/2" side and bottom lip supplied with the appliance canalternatively be removed (see Diagram 1) and replaced with J Style Trimor Metal Corner Bead purchased at your local hardware store to cover cut/exposed edges of the combustible facing material or any other finishingmaterials being used. 6 screws secure the bottom lip — see Diagram 1.These will be hidden so the outer panels will need to be removed to accessthe screws. See outer panel removal in this manual.7. This appliance can also be recessed (using combustible materials) witha hearth in front of the appliance. This can also extend to the top. Seemanual for details.