Regency City CB72EPV-LP Owners & Installation Manual

Also see for City CB72EPV-LP: Important information Owners & installation manual

Contents

City Series CB72EPV | 9owner's informationCLOTHING OR OTHER FLAMMABLEMATERIAL SHOULD NOT BE PLACEDON OR NEAR THE APPLIANCE.CHILDREN AND ADULTS SHOULD BEALERTED TO THE HAZARDS OF HIGHSURFACE TEMPERATURES, ESPE-CIALLY THE FIREPLACE GLASS, ANDSHOULD STAY AWAY TO AVOID BURNSOR CLOTHING IGNITION.INSTALLATION AND REPAIR SHOULDBE DONE BY AN AUTHORIZEDSERVICE PERSON. THE APPLIANCESHOULD BE INSPECTED BEFOREUSE AND AT LEAST ANNUALLY BY APROFESSIONAL SERVICE PERSON.MORE FREQUENT CLEANING MAYBE REQUIRED DUE TO EXCESSIVELINT FROM CARPETING, BEDDINGMATERIAL, ETC. IT IS IMPERATIVETHATCONTROL COMPARTMENTS, BURNERSAND CIRCULATING AIR PASSAGEWAYSOF THE APPLIANCE BE KEPT CLEAN.DUE TO HIGH TEMPERATURES, THEAPPLIANCE SHOULD BE LOCATEDOUT OF TRAFFIC AND AWAY FROMFURNITURE AND DRAPERIES.WARNING: FAILURE TO INSTALL THISAPPLIANCE CORRECTLY WILL VOIDYOUR WARRANTY AND MAY CAUSE ASERIOUS HOUSE FIRE.YOUNG CHILDREN SHOULD BE CARE-FULLY SUPERVISED WHEN THEY AREIN THE SAME AREA AS THE APPLI-ANCE. TODDLERS, YOUNG CHILDRENAND OTHERS MAY BE SUSCEPTIBLETO ACCIDENTAL CONTACT BURNS. APHYSICAL BARRIERS IS RECOMMEND-ED IF THERE ARE AT RISK INDIVIDUALIN THE HOUSE. TO RESTRICT ACCESSTO A FIREPLACE OR STOVE, INSTALLAN ADJUSTABLE SAFETY GATE TOKEEP TODDLERS, YOUNG CHILDRENAND OTHER AT RISK INDIVIDUALS OUTOF THE ROOM AND AWAY FROM HOTSURFACES.Important MessageSAVE THESE INSTRUCTIONSCity Line Direct Vent Fireplaces must be installedin accordance with these instructions. Carefullyread all the instructions in this manual first. Consultthe "authority having jurisdiction" to determine theneed for a permit prior to starting the installation.It is the responsibility of the installer to ensurethis fireplace is installed in compliance withmanufacturer's instructions and all applicable codes.Before You StartSafe installation and operation of this appliancerequires common sense, however, we are requiredby the Canadian Safety Standards and ANSIStandards to make you aware of the following:ANY SAFETY SCREEN, GUARD, ORBARRIER REMOVED FOR SERVICINGTHE APPLIANCE, MUST BE REPLACEDPRIORTO OPERATINGTHE APPLIANCE.IF THE BARRIER BECOMES DAMAGED,THE BARRIER SHALL BE REPLACEDW I T H T H E M A N U FA C T U R E R ' SBARRIER FOR THIS APPLIANCE.A BARRIER DESIGNED TO REDUCETHE RISK OF BURNS FROM THE HOTVIEWING GLASS IS PROVIDED WITHTHIS APPLIANCE AND SHALL BEINSTALLED FOR THE PROTECTIONOF CHILDREN AND OTHER AT-RISKINDIVIDUALSWE RECOMMEND REMOVING THEGLASS WITH THE GLASS VACUUMHOLDERS SUPPLIED BY THE MANU-FACTURER. LOWER THE GLASS TOREST IN A SAFE PLACE. THIS IS TOPREVENT DAMAGE TO THE GLASSEDGES. EXTRA CARE MUST BE TAKENWHEN REMOVING/INSTALLING THEGLASS. BREAKAGE OR DAMAGE TOTHE EDGE OF THE GLASS WHICHOCCURS AS A RESULT OF CARELESSHANDLING WILL NOT BE COVEREDUNDER WARRANTY.