Regency E33-NG1 Owners & Installation Manual

Also see for Gas Insert E33-LP1: Specifications

10 E33 FPI Direct Vent Gas InsertINSTALLATIONMINIMUM CLEARANCES TO COMBUSTIBLESFrom UnitSide Walls * A 8" (203 mm)Ceiling B 47" (1194 mm)Min. Mantel Height C 15" (381 mm)Max. Mantel Depth D 12" (305 mm)Alcove Width E 76" (1930 mm)Alcove Depth F 36" (914 mm)Hearth Height G 1-1/4" (32 mm)Hearth Width H 45-1/2" (1156 mm)Hearth Depth I 13" (330 mm)* Alcove side wall must have a min. of 8"clearance on one side.COMBUSTIBLE MANTEL CLEARANCESBecause of the extreme heat this fi replace emits, the mantel clear-ances are critical.Note: A non-combustible mantel may be installed at a lower heightif the framing is made of metal studs covered with a non-combustible board.Mantel can be installed anywhere in shaded area or higher using theabove scale.Note: Ensure the paint that is used on the mantel and the facingis "heat resistant" or the paint may discolour.