Regency E33-NG1 Owners & Installation Manual

Also see for Gas Insert E33-LP1: Specifications

E33 FPI Direct Vent Gas Insert 17INSTALLATIONEach Kit contains one LPG ConversionKit and one DC Sparker Kit.LPG Conversion Kit Contains:Qty. Part # Description1 904-529 5/32" Allen Key1 904-641 Burner Orifice #501 918-590 Label "Converted toLPG"1 908-528 Red LPG Label1 910-037 LPG Injector(Pilot Orifice)1 918-485 Instruction SheetDC Sparker Kit Contains:Qty. Part # Description1 820-475 Bracket DC Sparker1 820-476 Bracket DC Sparker1 904-153 Washer #8 ExternalStar1 904-330 Nut 8-32 Hex2 904-531 Bushing Split Plastic0.500 in.1 904-543 Screw 8-32 x 3/4Pan Head2 904-553 Screw #8 x 1/2Type "B", Black Oxide1 910-073 Spark GeneratorBattery Holder1 910-074 Spark GeneratorSwitch C/W Wire1 910-078 Battery Size AAEnergizer En911 910-199 Clip Wire Holder1 910-903 Wire Fan To PowerCord, Ground 30 in.904-781 Velcro Hook, Black904-782 Velcro Hook, Black1) Shut off the gas supply.2) Remove the louvers and glass door.3) Remove the logs and grate (refer LogInstallation section in E33 Manual).Ensure you slide the bottom log 03-17 offto the right-hand side to avoid chipping.5) Remove burner by unscrewing the 2screws.6) Pull off the pilot cap to expose the pilotorifice.7) Unscrew the pilot orifice with the 5/32"allen key and replace with the LPG pilotorifice provided in the kit, then replacepilot cap.Burner Orifice Removal8) Remove burner orifice with a 1/2" wrench,while using a 9/16" wrench to hold ontothe elbow behind the orifice and discardorifice.9) Reinstall new burner orifice LPG stamped#50 and tighten.4) Remove front base brick. 10) Turn control knob to the “OFF” position.11) Remove the black protection cap by handfrom the hi/low knob (Fig.1).12) Insert a 5/32” or 4mm Allen wrench intothe hexagonal key-way of the screw(Fig. 2), rotate it counter-clockwise until itis free and extract it.Installation of LPGConversion Kit:Fig. 1Fig.213) Check that the screw is clean and ifnecessary remove dirt.14) Flip the screw (Fig. 3).Fig.3CONVERSION KIT# 731-969 FROM NG TO LPfor E33-1 using SIT 820 NOVA Gas ValveTHIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTERIF IN DOUBT DO NOT DO THIS CONVERSION !!