Regency P121-NG2 Owners & Installation Manual

Also see for P121-LP2: Specifications

Contents

Regency ® P121-2/P121LC-2/P121RC-2/P131-2 Zero Clearance Direct Vent Gas Fireplace 27INSTALLATIONCONVERSION KIT #731-969 FROM NG TO LPFOR P121-2/P121LC-2/P121RC-2/P131-2 USING SIT 820 NOVA GAS VALVETHIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTERIF IN DOUBT DO NOT DO THIS CONVERSION !!5) Pull off the pilotcap to exposethe pilot orifice.6) Unscrew the pilot orifice with the allen keyand replace with the LPG pilot orifice inthe kit and replace pilot cap.7) Remove burner orifice with a 1/2" wrenchto hold onto the elbow behind the orificeand discard the orifice.Burner Orifice1) Remove the louvers and trim kit. Removethe front door.2) Remove the logs, embers.Each Kit contains one LPGConversion Kit and one DCSparker Kit.LPG Conversion Kit Contains:Qty. Part # Description1 904-529 5/32" Allen Key1 904-641 Burner Orifice #501 918-590 Decal "Converted toLPG"1 908-528 Red "LPG" label1 910-037 LPG Injector(Pilot Orifice)1 918-485 Instruction SheetDC Sparker Kit Contains:Qty. Part # Description1 820-475 Bracket DC Sparker1 820-476 Bracket DC Sparker1 904-153 Washer #8 External Star1 904-330 Nut 8-32 Hex2 904-531 Bushing Split Plastic0.500 in.1 904-543 Screw 8-32 x 3/4Pan Head2 904-553 Screw #8 x 1/2 Type "B",Black Oxide1 910-073 Spark GeneratorBattery Holder1 910-074 Spark Generator SwitchC/W Wire1 910-078 Battery Size AAEnergizer En912 910-199 Clip Wire Holder1 910-903 Wire Fan To Power CordGround 30 in.904-781 Velcro Hook, Black904-782 Velcro Hook, BlackDiagram 1 and 2: Remove the left and rightscrews and then slide the burner assemblyaway from the orifice and lift out.4) Remove the burner assembly by remov-ing the 4 Phillips head screws and thenslide the burner assembly away from theorifice and lift out.8) Reinstall new burner orifice LPG stamped#50 and tighten.9) Turn control knob to the “OFF” position.10) Remove the black protection cap by handfrom the high-low knob (Fig.1).Fig. 13) Remove the grate by lifting straight up.Remove the side brick panels (ifinstalled). The brick panel is veryfragile - handle with care.Installation of LPGConversion Kit:Diagram 1Diagram 2