Regency P121-NG2 Owners & Installation Manual

Also see for P121-LP2: Specifications

Contents

Regency ® P121-2/P121LC-2/P121RC-2/P131-2 Zero Clearance Direct Vent Gas Fireplace 35INSTALLATIONWIRING DIAGRAMSCaution: Ensure that the wires donot touch any hot surfaces and areaway from sharp edges.CAUTION: Label all wires prior to disconnection when servicing controls.Wiring errors can cause improper and dangerous operation.No electrical power supply is required for thegas control to operate. 120 Volt AC power isneeded for the fan switch and blower. The fancan be hard wired if desired. A terminal blockis provided on the left hand side of the unit.A three wire power cord can also be used andplugged into a suitable receptacle.(Do not cut the ground terminal off underany circumstances.)LockwasherGround WireNut#8 Ground Lug(for mobile home)Grounding Lug DetailStar washerThermodiscGreen (Ground)White (Neutral)Black (Live)BlackWhiteBlackWhite(*by others)(*by others)Black120 VAC60HZ(*by others)ON OFF(*Supplied by others - installaccording to local code)FAN 2FAN 1PiezoIgnitorTo Thermocouple INPilotAssemblyHILOOFFONPILOTGas PilotThermopileThermocoupleElectrodeRemote Transmitter(Optional)ON OFFRegencyRemote Receiveror Thermostat(Millivolt) (Optional)BrownRedBlackWhite"S.I.T" ValveTo BurnerON / OFFSwitch(To THTP)(To TH)GasInFor NATURAL GAS Units and Units NOT Equipped with DC Spark Boxes