Regency P33NG3-R Owners & Installation Manual

Contents

Regency ® P33 Gas Log Fireplace345th Grate Tab6) Place the bottom left front edge of Log251 against the left edge of the burner trayand rest the log on the cutout on Log253.7) Position Log 252 across the cutouts in Logs254 and 253. The notch in the bottom rightend fitting against the 5th grate tab.8) Pull off ember size pieces of rockwool andgently place them on the front of the burnertray in the places shown in the photo below.Do not compress the rockwool, leave itloose.252250254253251253250254253254252251250254253Cutout9) Test fire to ensure proper light off (makesure flame flows smoothly from one end ofburner to the other). If there is any flamehesitation, check that area for any blockageof the burner ports.10) Install flush glass and bay glass (if used) asper instructions in this manual.Place rockwool in these 2 locationson the burner tray.INSTALLATION