Regency Panorama P33-10 Owners & Installation Manual

Contents

Regency ® P33-10 Zero Clearance Direct Vent Gas Fireplace | 25|25installationRIGID PIPE VENTING ARRANGEMENTSHorizontal TerminationsREGENCY® DIRECT VENT SYSTEM (FLEX) (Propane & Natural Gas)This diagram shows all allowable combinations of vertical runs with horizontal terminations, using one 45 o and one 90 o elbow (two 45 o elbows equal one 90 oelbow).Note: Must use optional rigid pipe adaptor (Part # 510-994) when using rigid pipe vent systems. (Refer "Rigid Pipe Venting Systems" Section)• Maintain clearances to combustibles.• Horizontal vent must be supported every 3 feet.• Firestops are required at each floor level and whenever passing through a wall..A vent guard should be used whenever thetermination is lower than the specified minimumor as per local codes.Note: Regency® Direct Vent System (Flex)is only approved for horizontalterminations.MinimumSimpson Dura-Vent Center-LineMinimumFlex Kit Center-Line