MWS_55_e.indb Page 34Manual MWS 55 / MWS 88 / MWS 10 and Sensors 55geändert am 26.10.2017 von DOREINHARDT System- und Messelectronic GmbHFax: 08196/7005 and 1414 email: wetter@reinhardt-testsystem.de Web: http://www.reinhardt-wetterstationen.deto table of contents4.1.4 Allocation of the Connection Cable for Heating and GPS-Receiver (Garmin GPS18x LVC):5 pole connector (only combined GPS / Heating connector)(MWS 55-Heating and GPS-connection)1 x 5 pole connector 5-pole connectorPin 2 (GND Heating) < > GND-PSU 18VDCPin 3 (VCC Heating) < > VCC-PSU 18VDC------------------------------------------------------------------------------------------------------Pin 1 (GND GPS) < > Garmin GPS18x LVC GNDPin 4 (Signal GPS) < > Garmin GPS18x LVC OutPin 5 (VCC GPS-10..24VDC) < > Garmin GPS18x LVC VCC4.1.5 Allocation of the Connection Cable for Sensors with RS422-port7 pole connector(MWS 55-power supply and data-connection)Pin 1 (GND) < > PSU-GND (grey)Pin 2 (GND - used for MWS 10)Pin 3 (R+ of MWS) < > wire (yellow)Pin 4 (T- of MWS) < > wire (white) - (Caution: has changed !!)Pin 5 (VCC 18VDC) < > PSU-VCC (pink)Pin 6 (R- of MWS) < > wire (green)Pin 7 (T+ of MWS) < > wire (brown) - (Caution: has changed !!)
