REINHARDT System- und Messelectronic GmbHBergstr. 33 86911 Diessen-Obermühlhausen Postfach 12 41 D-86908 Diessen Tel. 08196 - 934100MWS_55_e.indb Page 45geändert am 26.10.2017 von DOManual MWS 55 / MWS 88 / MWS 10 and Sensors 55to table of contents4.4.3 WEB-ServerTo use the station as WEB-server, the HTTP protocol needs to be enabled (see !DC or ?DC, Bit 24).Um die Station als Web-Server zu benutzen, muss das HTTP-Protokoll freigeschaltet sein(see !DC or ?DC, Bit 24)and the Ethernet port must be enabled (!F+24 or *ADMIN SET PERMIT 15 ON) or being con-figured.It is important that at the access permissions with *ADMIN SET INCLUDE the connectiontype HTTP (or HTTP* for privileged access) is added. Access from an IP / MAC address not beingenabled for this connection type will get no answer!A HTTP read access may be granted with the command *ADMIN SET INCLUDE 192.168.0.12[HTTP].If the station hasn't got an internal SD-card, via the HTTP port 80 an internal default page canbe retrieved from the stations IP-address (set by *ADMIN ETHERNET IP).
