Saeco Atlante 500 Use And Maintenance Manual

English9469.2.3 Description of messages in the programming menuDISPLAY Description1. The SYSTEM MANAGEMENT items are:SYSTEM MANAGEMENT…1.1. Enables an identification code to be assigned to the vending machine.VM Code5310001.2. Enables setting of the maximum amount of beverage or coffee. Once the maximum amount is reached, thevending machine stops dispensing the relevant beverages. The first digit on the left (“00000”) refers to the quantityof product dispensed since the last “RESET” (partial counters).Stops… The right hand digit, preceded by “LIM”, shows the maximum dispensable quantity (valuemay be modified).1.2.1. Enables setting of the maximum number of coffee cups to be dispensed before the stop.Stop coffee K1.2.2. Enables setting of the maximum number of coffee cups to be dispensed before the stop.Stop coffee C1.2.3. Enables setting of the maximum number of beverages to be dispensed before the stop.Stop beverages1.2.4. Enables resetting of all partial counters relative to product quantity stop functions.Reset1.3. (Only if complete Menus are enabled)Step down counters… Allows the use of the water filter to be checked.1.3.1. Date of the last filter reset.Last Filter Change 31/01/20081.3.2. Number of litres of water that can still be dispensed before the filter needs to beregenerated. When this value is less than 1, a Warning (W83) is recorded in the ErrorLOG.Remaining qty951.3.3. Number of litres of water that can still be dispensed from the filter.Filter limit1001.3.4. Select YES to indicate a new filter has been installed This operation returns “Remaining Qty”to the same value as “Filter Limit” and the date in the “Last Filter Change” is changed totoday’s date.Filter reset1.3.5. Enables management of the "Remaining Qty" countdown.Filter enabledyes ImportantFrom the maintenance menu (button P2 on the CPU), you can access "Water Filter", "LastFilter Change", "Remaining Qty" and "Filter Reset".1.4. It enables setting the coffee boiler management parameters.Boiler 1 temp.001.4.1. It allows you to set the temperature that the vending machine keeps for a few minutes aftera beverage has been brewed. The set value is expressed in centigrade.Min. Temperature901.4.2. It allows you to assign the temperature to which the vending machine is brought after acertain time from the last dispensing, so that the natural lowering of the temperature of thehydraulic circuits can be compensated. The set value is expressed in centigrade.Max. Temperature1001.5. Allows setting the working temperature for the instant products boilerBoiler 2 temp.00