Saeco CAP001/A Instruction And Maintenance Manual

Contents

English8Legend:A‘ Adjustable feetB‘ Water drain (27 mm ø tube)C‘ Water supply (19 mm ø tube)D‘ Power mains (13 mm ø power cord)E‘ Coffee grounds trayF‘ Single hole to replace holes B’, C’ and D’(100 mm ø pipe).fig. 6A'D'C'F'B'A'A'A' E'fig. 7Neutral (N) - BluePhase (L 1) - BrownPhase (L 2) - BlackEarth - Yellow/GreenPower cordtype H07RNF section 4x2,5 mm2fig. 8Connection of plugto a 400 V2N~ two-phase mains lineCH(Switzerland)CEIL1L2N N L2L1Machine surface topFurthermore it is possible to dispose of the coffee grounds directlyinto a container to be placed below the machine surface top, asfollows:- drill the surface top as indicated (ref. E’, fig. 6);- break the pre-marked diaphragm (ref. E, fig. 6) on the bottomof the grounds tray (ref. 17, fig. 1).ImportantIn order to make connection operations easier, the diameterof the holes to be drilled in the surface top will have to begreater than that of the pipes and cables indicated in thelegend of fig. 6.DangerAccording to the norms ruling in the Country where the ma-chine is installed, the cord for the connection to the mainsmust be equipped either by an all-pole switch (with a mini-mum contacts’ opening clearance of 3 mm), or with a plugconforming to the norms.The all-pole switch must be suitable for the power drawn bythe machine and able to detect all voltage polarities.Check that the electrical cables of the installation are cor-NB: For the 230V~ single-phase connection it is necessary to usethe special kit (code 1020.R05) and to follow the instructions con-tained therein.MACHINE FRONT PARTrectly proportioned to the power drawn by the machine.The connection point (electrical socket or all-pole switch) mustbe placed in a position easily reachable by the user, in orderto be able to disconnect the machine from the mains, shouldthis be necessary.In case of installations with 400 V two-phase current, utilise thephases in such a way as to supply the machine with 230 V single-phase current (fig. 7).Only for EUROPEAN models