English6.7 Light coffee dispensingThis type of dispensing is performed by utilizing doses of pre-ground coffee manually introduced into the machine throughthe pre-ground coffee slot (ref. 6, fig. 1). To the quantity thusprovided manually the machine autonomously adds a smalldose of ground coffee; this procedure compensates for thelesser quantity of ground coffee present in the pre-packagedbags and improves the organoleptic qualifies of the drinkdispensed.- Briefly press (less than 1 sec.), the key twice andconsecutively, the display will show "LIGHT COFFEE"- introduce through the pre-ground coffee slot (ref. 6, fig. 1),the contents of one dose of pre-ground coffee;- press key or .N.B.: Dispensing with pre-ground coffee is programmableonly for one dose.6.8 Dispensing coffee in jugThis function allows the dispensing of more coffees(programmable) in a single container (such as a jug).By pressing key 1 to 8 times, as many consecutivedispensing instances as requested, up to a maximum of 2,5liters of coffee.- Position the jug under the dispenser (ref. 21, fig. 1).- Briefly press (less than 1 sec.) key for as many timesas the number of instances to be dispensed. The displaywill show "JUG X ..." with the number of programmeddispensing instances;- press key to confirm and start the cycle;- the machine will supply the dispensing instancesprogrammed and the display will show the icon of a jugbeing filled with the number of instances alreadydispensed.- having completed the dispensing, the display will showagain "READY FOR USE";- if the eye e has to be stopped before the preset time it willbe sufficient to either press the jug key or any coffee keys.N.B.: The electronic control of the machine automaticallymanages the double coffee dispensing eye e to reduce to theminimum the time taken.Example: by programming 5 dispensing instances, theelectronic control will set up dispensing for 2 double coffeesplus a single one.N.B.: Warning: after 1 jug dispensing at full dosage (approx.2 liters) it is necessary to pause for 2 minutes to allow themachine standard conditions restoration.6.9 Hot water dispenser (LUXE version)This function allows multiple (programmable) dispensing ofhot water in a single container.By pressing 1 to 8 times key as many consecutive andcontinuous dispensing instances will be obtained, up to amaximum of 1 liter of hot water in the same container.- Position the container under spout (ref. 11, fig. 1).- Briefly press (less than 1 sec.), multiple times, keyaccording to the number of desired dispensing instances.The display will show "HOT WATER X ..." with thenumber of programmed dispensing instances;- press key to confirm and start the cycle;- the machine will supply the dispensing instancesprogrammed and the display will show the icon of acontainer being filled with the number of Instancesalready dispensed.- having completed the dispensing, the display will showagain "READY FOR USE";N.B.: It is possible to dispense a programmed dose of hotwater only when function "HOT WATER PROGRAMM." is In"ON" mode (see "6.14 Menu-programmable functions");If instead the function is "OFF", the dispensing must bestopped by pressing again key .Danger of burnsNever direct the hot wafer jet towards body parts.Direct the pipe only by moving it through the specialrubber heat protector (ref. 9, fig. 1).It is furthermore advisable to keep the spoutsubmerged within the container.6.10 Steam dispenser (LUXE version)Submerge the spout (ref. 16, fig. 1) within the liquid to bewarmed up and rotate the knob (ref. 12, fig. 1) anti-clockwise.After having reached the desired temperature close the knobagain by rotating it clockwise.Danger of burnsNever aim the steam jet towards body parts. Direct thepipe only by moving it through its rubber heatprotector (ref. 14, fig. 1).It is advisable to keep the spout submerged within thecontainer.ImportantAfter each usage always clean the traces of the heateddrink from the spout with a moist cloth.11