Saeco Modular Coffee Instruction And Maintenance Manual

Also see for Modular Coffee: Instruction and maintenance manual

Contents

English4.3 Coffee dispenser unitThe position of this unit (ref. 21, fig. 4) can be modifiedaccording to the height of the container used.In fact it is possible to move the mobile dispenser backwards(ref. 23, fig. 4) and the telescopic dispenser upwards ordownwards (ref. 24, fig. 4). This allows different heights to beobtained.(see fig. 4).N.B.: If a container taller than 90 mm is always andexclusively used, the telescopic dispenser can be removedaltogether (ref. 23, fig. 4), by drawing it downwards.4.4 Steam/hot water spout (LUXE version)The steam (ref. 16, fig. 1) and hot water spouts (ref. 11, fig.1) are equipped with suitable rubber protectors (ref. 14 and 9,fig. 1) so that they can be easily gripped and moved evenwhen overheated.DangerOperation falling within the competence of theMaintenance technician.WarningThe connection will have to be implemented by observingthe national safety rulesCarry out connections as follows:- Check that the surface upon which the machine is placedis firm and able to withstand the weight.- Drill the relevant holes in the surface top (ref. C' and D'or F', fig. 6), and possibly also the other holes (ref. B7,fig. 6 e ref. E', fig. 6 - see N.B.), as indicated in thedrawing.- Install the machine on the surface and level it byadjusting the feet made available for this operation (ref.A, fig. 5).- Connect machine to the drinking water system by way ofthe special fitting (ref. C, fig. 5).WATER AND WASTE CONNECTIONS SHALLCOMPLHY WITH APPLICABLE FEDERAL STATES, ORLOCAL CODES. (Only for USA and CDN models)- Connect to the power mains by way of the relevant cord(ref. D, fig. 5).N.B.: It is possible to connect the drip fray (ref. 15, fig. 1)directly to an outlet by proceeding as follows:- drill the surface top as indicated (ref. B', fig. 6);- break the removable diaphragm which seals the driptray outlet (ref. 15, fig. 1);- join a drain tube to the fitting (ref. B, fig. 5), by way ofa suitable hose clamp.75 - INSTALLATION5.1 Connections